Text Box: Tunstall Series TA-FT F & T Steam Traps The "H" pattern body on all ¾", 1" (15, 30, 75 & 125 psig) and 1-1/4" (15 & 30 psig) has been designed to offer maximum installation flexibility. For larger sizes 1-1/2", 2" (15, 30, 75 & 125 psig) and 1-1/4" (75 & 125 psig), the inlet and outlet taps are located in the cover. This design allows for higher capacities and direct retrofits for older piping systems. All Tunstall float and thermostatic traps can be serviced without disturbing system piping. Text Box: Tunstall Series TA-FTH (High Capacity) F & T Steam Traps The "FTH" series traps are designed for use in systems that produce an exceptionally large amount of condensate (625 to 24,000 lbs. of condensate per hour). Two sizes (1-1/2" & 2") available for low, medium and high pressure applications with a "H" pattern piping connection for maximum installation flexibility.   Text Box: Tunstall Inverted Bucket Steam Trap Model 8080: Max. Operating Pressure: 150 PSIG Max. Allowable Temperature 366°F   Text Box: Tunstall Inverted Bucket Steam Trap Model 8181: Max. Operating Pressure: 250 PSIG Max. Allowable Temperature 450°F   Text Box: Tunstall Thermal-Disc Steam Trap The Tunstall Thermal-Disc™ operates using Bernoulli’s Theorem; as condensate enters the Thermal-Disc™ Trap, it lifts the thermal disc and discharges through outlet ports. Multiple outlet ports assure that the lift of the disc is parallel to the seat for efficient operation. Once the condensate reaches its flash point, the pressure on the top of the disc increases, due to higher velocity steam, causing the disc to snap closed. As the steam above the disc condenses, pressure above the disc will lower, and allow the disc to lift again and repeat the process.   The Steamtrap Superstore

                                                                Call Now, Toll Free 1-866-815-6532